Rocker Panel - LH (Remove and Replace)

FRT No: 12202002

Removal

  1. Remove the plastic rivets (x2) that secure the trailing edge of the front wheel arch liner to the rocker panel finisher.
  2. Remove the plastic rivets (x4) that secure the leading edge of the rear wheel arch liner to the rocker panel finisher.
  3. Carefully release the rocker panel bright trim from the vehicle by releasing the clips that secure it to the body.
    Caution: Replace any broken clips.
  4. Remove the screws (x12) that secure the rocker panel finisher to the body (torque 1.5 Nm).
    Caution: Take care not to damage component(s).
    Caution: Protect paintwork from possible damage during this procedure.
  5. Remove the rocker panel from the vehicle.

Installation

Installation procedure is the reverse of removal.