Module - Electric Park Brake - EPB (Remove and Replace)

FRT No: 17151502

Removal

  1. Remove the RH side trunk trim (refer to procedure).
  2. Disconnect the harness connectors (x2) from the electric park brake (EPB) module.
  3. Disconnect the harness connections (x2) from the liftgate control module.
  4. Remove the nuts (x4) that secure the bracket to the wheelhouse studs (torque 3 Nm).
  5. Remove the bracket and modules assembly.
  6. Remove the nuts and bolts (x3) that secure the modules to the bracket (torque 2 Nm).
  7. Remove the EPB module from the bracket.

Installation

Installation procedure is the reverse of removal, except for the following:
Use Toolbox to update or redeploy the firmware:
  • If the vehicle is not running the latest firmware, run the "Vehicle Firmware Update" procedure.
  • If the vehicle is running the latest firmware, run the "Firmware Redeploy" procedure.