Seat Belt Assembly - 2nd Row - Center (Remove and Replace)

FRT No: 20051402

Removal

  1. Remove the 2nd row seat cushion (refer to procedure)
  2. Carefully release pegs (x2) securing seatbelt trim to seat back.
  3. Release clips (x18) securing seat back cover. Remove for access to middle seat belt.
  4. Remove the bolt that secures the seat belt to the 2nd row seat base frame (torque 40 Nm).
    Caution: This bolt is a one time use component. Ensure that a new bolt is used during reinstallation.
  5. Release top rail reinforcement from foam for access.
  6. Remove bolt (torque 40 Nm) securing seatbelt reel to seat frame.
  7. Remove middle seat belt assembly.

Installation

Installation procedure is the reverse of removal, except for the following:
Caution: Replace any broken clips.