Bracket - Vacuum Pump (Remove and Replace)

FRT No: 33032202

Warning: If the vehicle has air suspension, activate "Jack" mode on the touchscreen before raising and supporting the vehicle.

Removal

  1. Remove the front skid plate (refer to procedure).
  2. Remove the bolts (x2) that secure the vacuum pump mounting bracket to the front bumper carrier (torque 6 Nm).
  3. Lower the vehicle.
  4. Remove the vacuum pump (refer to procedure).
  5. Remove the bolts (x2) that secure the vacuum pump mounting bracket to the front subframe (torque 6 Nm).
    Note: Image shown with the vacuum pump installed.
  6. Remove the vacuum pump mounting bracket from the vehicle.

Installation

Installation procedure is the reverse of removal.