Shaft - Steering Column - Intermediate Upper (Remove and Replace)

FRT No: 32011202

Removal

  1. Remove the driver's side footwell cover (refer to procedure).
  2. Disconnect the lower intermediate shaft (refer to procedure).
  3. Disconnect the lower intermediate shaft from the slot in the upper intermediate shaft.
  4. Release the upper intermediate shaft from the column shaft.
  5. Release the clips (x4) that secure the steering shaft seal to the bulkhead.
  6. Remove the upper intermediate shaft.

Installation

Installation procedure is the reverse of removal, except for the following:
Caution: Replace all nylon-insert locknuts.
  1. Ensure that the upper intermediate shaft to column marks align correctly.
  2. Run the "Power Steering (EPAS) Control" procedure in Toolbox.