Motor - Fan assembly - HVAC (Remove and Replace)

FRT No: 18103002

Removal

  1. Power the passenger seat fully rearward for access.
  2. Remove the passenger footwell closing trim (refer to procedure).
  3. Disconnect the fan harness connector and position the harness aside.
  4. Remove the screw that secures the heating duct to the HVAC assembly (torque 1 Nm).
  5. Remove the screws (x3) that secure the fan housing to the HVAC assembly (torque 1 Nm).
  6. Release the fan housing from the HVAC assembly and maneuver it past the heater duct.
    Caution: Take care not to damage component(s).
  7. Remove the HVAC fan assembly from the vehicle.
    Note: Clean the affected areas before installation.
  8. Remove the screws (x3) that secure the fan and motor to the housing.
  9. Remove the fan and motor from the fan housing.
    Note: Clean the affected areas before installation.

Installation

Note: Remove debris from the fan housing prior to installation.