12V Battery Bracket Beam (Remove and Replace)

FRT No: 17012702

Removal

  1. Remove the 12V battery (refer to procedure).
  2. Release the 2 bolts that secure the 12V battery bracket to the front crossmember (torque 15 Nm).
  3. Remove the 12V battery tray.
  4. Release the 2 clips that secure the battery sensor harness to the bracket.
  5. Release the barrel clip that secures the coolant hose to the rear of the bracket.
  6. Release the bolt that secures the coolant hose retaining ring to the battery support brace (torque 5 Nm). Gently pull the hose away from the brace.
  7. On each side of the vehicle, release the bolt that secures the battery support brace to the front frame rail (torque 3.5 Nm). Remove the battery support brace and bracket assembly.

Installation

Installation procedure is the reverse of removal.