Trim - Sill Panel - LH - Rear (Remove and Replace)

FRT No: 15184802

Removal

  1. Remove the 'C' post LH rear trim (refer to procedure).
  2. Remove the 'C' post LH upper trim (refer to procedure).
  3. Fold the 2nd row seat backrests all the way forward.
  4. Remove the LH rear seat side bolster (refer to procedure).
  5. Release the clips that secure the 'C' post middle trim.
  6. Use a trim tool to remove the 'C' post middle trim.
    Caution: Take care not to damage component(s).
    Note: Components have been removed in this graphic to aid clarity.
  7. Release the 'C' post lower trim panel by releasing the trim clips, starting from the 'B' post and working towards the rear of the vehicle:
    Caution: Take care not to damage component(s).
    1. Pull inboard and lift the front lower edge of the trim panel to release the hook from the 'B' post.
    2. Pull straight up at the edge closest to the 'B' post to release the clip.
    3. Insert a trim removal tool as shown, 1-3 in (25-75 mm) from the corner of the sill panel and gently pull upwards to release the clip.
    4. Remove the 'C' post lower trim panel from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:

Caution: Replace any broken clips.