Door Glass - LH - Front (Remove and Replace)

FRT No: 11500102

Removal

  1. Remove door inner belt glass seal (refer to procedure)
  2. Loosen but do not remove clamp nut securing door glass to regulator (torque 7.5 Nm).
    Caution: Take care not to damage component(s).
  3. Lower door glass and align with opening in door panel.
  4. Remove adhesive patch from glass retainer access opening.
  5. Using a suitable tool, depress clip and pull leading edge of glass vertically to release from regulator clip.
  6. Remove door glass.

Installation

  1. Installation procedure is the reverse of removal, except for the following:
  2. Cover openings with waterproof adhesive tape.
  3. Check window alignment and adjust if necessary.