Filter - Particulate (Remove and Replace)

FRT No: 18100102

Removal

  1. Remove the rear center underhood apron (refer to procedure).
  2. Release the retainers (x2) that secure the particulate filter cover.
    Note: Components have been removed in this graphic to aid clarity.
  3. Remove the particulate filter cover.
  4. Remove the particulate filter.

Installation

Installation procedure is the reverse of removal, except for the following:
Note: Clean the affected areas before installation.
Caution: Care must be taken to ensure that the particulate filter is not kinked or twisted during installation.
Ensure that the filter housing components are assembled correctly.