Firmware Update - CHAdeMO Charging Adapter

FRT No: 50011003

Tools required:

CAN Setup

  1. Connect the USB-CAN dongle to a laptop that is equipped with Toolbox 2.0 or higher.
  2. Connect the CHAdeMO CAN programming connector to the USB-CAN dongle.
  3. Connect the CHAdeMO CAN programming connector to an external 12V power supply.
  4. Connect the CHAdeMO CAN programming connector to the CHAdeMO charging adapter.

Firmware Update

Note: It is not necessary to connect the diagnostic cable to the vehicle.

  1. In the bottom left corner of the screen, click the gray circle on the right. A popup box appears:
    1. In the Vehicle field, select Tesla CHAdeMO Adapter.
    2. In the Bus field, select SE.
    3. Ensure that the Enable Diagnostics box is checked.
  2. Click Enable.
  3. In Toolbox, selectPanels > Charging > CHAdeMO Adapter Firmware Update.
    Note: If the CHAdeMO Adapter Firmware Update button is not present:
    1. Select Options > Plugins
    2. Ensure that the checkbox for CHAdeMO is checked.
    3. In the top right corner of the window, click Enable.
  4. Click the Start/Play button and follow the onscreen instructions.