Underhood Storage Unit (RWD) (Remove and Install)

FRT No: 15240701

Removal

  1. Remove the underhood storage extension box (refer to procedure).
  2. Remove the rear underhood apron (refer to procedure).
  3. Remove the front underhood apron (refer to procedure).
  4. Disconnect the fir tree clips (x2) that fasten the hood release cable to the lower left edge of the storage unit.
  5. Remove the bolts (x4) that secure the sides and rear of the storage unit (torque 8 Nm).
  6. Remove the bolts (x2) that secure the storage unit to the front bumper carrier (torque 6 Nm).
  7. Remove the storage unit from the vehicle.

Installation

Installation procedure is the reverse of removal.