Rear View Mirror - 1st Generation (Remove and Replace)

FRT No: 15050202

Note: This procedure describes how to remove and replace the 1st generation rear view mirror. If the vehicle is equipped with a 2nd generation rear view mirror, refer to procedure 15050502 (refer to procedure).

Removal

  1. Cover the dash assembly to avoid damage.
    Caution: Make sure the touch screen is fully protected.
  2. Release the clips (x5) that secure the RH and LH mirror finishers.
    Caution: Take care not to damage component(s).
  3. Remove the LH and RH mirror finishers.
  4. Carefully turn the mirror assembly counter-clockwise and release it from the glazing mount.
  5. Release the clip and disconnect the mirror electrical harness connection.
  6. Remove the mirror.

Installation

Installation procedure is the reverse of removal.