Horn - 2nd Generation (Remove and Replace)

FRT No: 17405202

Removal

  1. Remove the active center louver assembly (refer to procedure).
  2. Place the active center louver assembly on a soft, clean surface with the front of the duct assembly facing down.
  3. Release the bolt that secures the horn bracket to the active center louver assembly assembly (torque 5 Nm).
    Note: Do not release the nut that secure the horn to the bracket.
  4. Remove the horn and bracket by maneuvering them out through the circular hole in the radiator duct assembly.

Installation

Installation procedure is the reverse of removal.