Power Strut - Liftgate (Remove and Replace)

FRT No: 11201002

Removal

  1. Open the liftgate.
  2. Support the liftgate in the open position.
  3. Remove the RH C-post upper trim (refer to procedure).
  4. Release the RH rear corner of the headlining from the body.
    Note: Do not remove the headlining.
  5. Disconnect the power strut electrical harness connector.
  6. Release the electrical harness from the body.
  7. Release the clip that secures the power strut to the body.
  8. Disconnect the power strut from the ball joint.
  9. Release the clip that secures the power strut to the liftgate.
  10. Remove the power strut.

Installation

Installation procedure is the reverse of removal.