Trim - Sill Panel - LH (Remove and Replace)

FRT No: 15180102

Removal

  1. Remove the LH middle 'A' pillar trim panel (refer to procedure).
  2. Use a trim tool to release the 2nd clip from the rear.
    Caution: To avoid damaging the sill panel, do not attempt to pry it up from the rear before releasing this clip.
  3. Release the remaining clips.
    Note: The number of clips varies depending on the build date of the vehicle.
  4. Remove the trim panel.

Installation

Installation procedure is the reverse of removal, except for the following:
  • Replace all broken trim clips except for the clip on the tower.
  • When reinstalling the RH sill trim panel, position the front of the trim panel between the footwell cover and the A-pillar, then twist the trim panel to secure the bottom and rear trim clips.
    Caution: Do not damage any harness connections.