Special Tools - Wiper Arm Removal Tool

1058696-00-A

To remove the LH wiper arm:

  1. Refer to Service Manual procedure 17501802 to access the wiper arm.
  2. Loosen the bolt on the tool until only 2 to 3 threads are visible underneath.
  3. Place the tool around the base of the wiper arm so that the tip of the bolt rests on the spindle.
  4. Use a wrench to tighten the bolt until the taper on the wiper arm breaks.
    Caution: Be careful to not damage the paint on the underside of the hood with the wrench.
  5. Remove the tool.
  6. Remove the wiper arm from the spindle.