Trim - A-Pillar - Upper - LH (Remove and Install)
FRT No: 15184001
Removal
Remove the sun visor bezel
(refer to procedure)
.
Remove the screw that secures the A-pillar trim to the B-pillar trim (torque X Nm).
View large image.
Remove the screws (x3) that secure the trim panel (torque 5 Nm).
View large image.
Partially remove the primary seal.
View large image.
Release the tether from the stud on the body of the vehicle.
Pull the rear of the trim panel towards the front of the vehicle to release it from the headliner.
Note:
Release the tether from the stud on the body of the vehicle while releasing the trim panel.
Disconnect the electrical harnesses from the microphone and tweeter.
Pull the front of the trim panel upward to release it from the defrost mesh grille.
Remove the trim panel from the vehicle.
Installation
Installation procedure is the reverse of removal.