Wheel Arch Liner - Rear - LH (Remove and Replace)

FRT No: 12011102

Warning: "Jack mode" must be activated on vehicles with air suspension before lifting the vehicle. Failure to do this might lead to suspension damage and could cause serious personal injury.
Note: Vehicles with air suspension might need the suspension to be set to "High" or "Very High" to allow the vehicle to be positioned and supported correctly on a vehicle lift.

Removal

  1. Remove the rear wheel (refer to procedure).
  2. Remove the push clips (x14) that secure the wheel arch liner.
    Base of wheel arch liner Top of wheel arch liner

    View large image.

    View large image.

  3. Remove the nuts (x4) that secure the wheel arch liner to the studs on the chassis (torque 6 Nm).

    View large image.

  4. Remove the rear wheel arch liner.

Installation

Installation procedure is the reverse of removal.