Tuner - AM - FM (Remove and Replace)

FRT No: 21220102

Removal

  1. Remove the driver's side lower dash trim (refer to procedure).
  2. Open the latch and disconnect the electrical connector from the amplifier.
    Caution: Take care not to damage component(s).
  3. Remove the LH footwell cover (refer to procedure).
  4. Remove the screws that secure the OBD connector to the amplifier/tuner bracket (torque 4 Nm).

    View large image.

  5. Release the OBD connector from the cross car beam and set aside.
  6. Dicsconnect the electrical connectors from the AM/FM tuner.

    View large image.

  7. Release the fir tree clips that secure the harnesses to the bracket.

    View large image.

    View large image.

  8. Remove the bolts that secure the amplifier/tuner and bracket assembly to the cross car beam (torque 6 Nm).
  9. Remove the screws that secure the AM/FM tuner to the bracket (torque 4 Nm).
  10. Release the AM/FM tuner from the bracket.

Installation

Installation procedure is the reverse of removal, except for the following:

  • Use Toolbox to update or redeploy the firmware:
    • If the vehicle is not running the latest firmware, run the "Vehicle Firmware Update" procedure.
    • If the vehicle is running the latest firmware, run the "Firmware Redeploy" procedure.