Armrest Pads - Center Console - 1st Row (Remove and Replace)

FRT No: 15192502

Removal

  1. Remove the LH armrest pad from the vehicle:
    1. Slide the LH armrest pad so that it covers 1/2 of the cupholder.
    2. Pull up firmly on the front of the armrest pad to disengage the track.
  2. Repeat the previous step on the RH armrest pad.
  3. Place the armrest pads on a clean work surface.
  4. Remove the screws that secure the tracks to the armrest pads. Retain the screws; they can be reused to secure the tracks to the new armrest pads.

Installation

  1. Apply Loctite blue 242 threadlocker to the screws that secure the tracks to the armrest pads.
  2. Install the tracks on the new armrest pads (torque 5.5 Nm).
  3. Install the LH armrest pad on the vehicle:
    1. Slide the movable portion of the LH armrest tracks to align with the mating surface that is attached to the center console, then lightly position the LH armrest pad on the console.
      Tip: Gently slide the armrest pad back and forth to verify that the track is properly aligned.
    2. Apply a sharp impact on the top of the armrest pad to secure the track.
    3. Ensure that the armrest pad is fully seated and slides properly.
  4. Repeat the previous step on the RH armrest pad.