Fuse Box - Underhood (Remove and Replace)
FRT No: 17012402
Remove
Disconnect 12V power
(refer to procedure)
.
Disconnect the pyrotechnic fuse harness.
View large image.
Remove the fuse box cover.
Release the nut that secures the harness to the 250 A fuse (torque 15 Nm).
View large image.
Release the nut that secures the harness to the 80 A fuse (torque 6 Nm).
View large image.
Release the nut that secures the 12V battery positive cable to the fuse box (torque 15 Nm).
View large image.
Release the nut that secures the harness to the 125 A fuse (torque 6 Nm).
View large image.
Release the nut that secures the harness to the 125 A fuse (torque 6 Nm).
View large image.
Release the 4 clips at the rear of the fuse box that secure it to the bracket.
Gently rotate the fuse box to gain access to the underside.
On each side of the fuse box, rotate the clip inboard to release the harness.
View large image.
Rotate the clip on the center harness toward the RH side of the vehicle to release it from the fuse box.
View large image.
Remove the fuse box from the vehicle.
View large image.
Installation
Installation procedure is the reverse of removal.