Torque Rod - Active Spoiler - LH (Remove and Replace)

Open the liftgate.

Remove the LH and RH side liftgate trims (refer to procedure).

Remove the bolts (x4) that secure the bottom of the speaker shelf bracket (torque 2.5 Nm).

Remove the bolts (x4) that secure the top of the speaker shelf bracket (torque 2.5 Nm).

Note: Components have been removed in this graphic to aid clarity.

Carefully lift the speaker shelf bracket and disconnect the electrical connectors (x5) for the speakers (x2), tweeters (x2), and chime.

Remove the speaker shelf bracket from the vehicle.

Disconnect the electrical connectors (x2) from the active spoiler motor.

Remove the screws (x2) that secure the torque rod to the active spoiler motor (torque 6 Nm).

Tip: It might be helpful to stand at the base of the liftgate and look through the hole for the pull cup when locating the screws.

Note: Components have been removed in this graphic to aid clarity.

Carefully lift the torque rod off of the active spoiler motor and pull the torque rod inboard to release it from the active spoiler hinge.

Note: There is a notch in the torque rod sleeve to ensure that it is installed correctly.

Notch in torque rod sleeve	Notch in hinge key
View large image.	View large image.

Remove the torque rod from the vehicle.

Removal