Pinch Sensor (2nd row) - Front - LH (Remove and Replace)

FRT No: 11354402

Removal

  1. Remove the rear door speaker (refer to procedure).
  2. Disconnect the pinch sensor electrical connector.
  3. Release the fir tree clip that secures the pinch sensor harness to the door.
  4. Use a plastic trim tool to remove the push clips (x7) that secure the pinch sensor to the door.
    Caution: Care must be taken to avoid damage to paintwork and exterior trim.
    Caution: Care must be taken to avoid damage to the harnesses behind the pinch sensor.
  5. Release the pinch sensor harness grommet by pulling it away from the door. Pull the pinch sensor harness out through the grommet in the rear of the door shell.
  6. Remove the pinch sensor from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:

Caution: Replace any broken clips.
Ensure proper operation of the pinch sensor.