Installation procedure is the reverse of removal, except
for the following:
Caution: Tighten the lug nuts evenly using a diagonal sequence.
Caution: An impact wrench or electric wrench can be used only during the initial
threading of the lug nuts. Use a torque wrench to fully tighten the lug nuts.
Caution: Use a 6 point socket
to tighten tall lug nuts. Do not use a 12 point socket or a speciality socket on tall
lug nuts.
-
If the TPMS sensors are not reinstalled in the same locations (for example, when
rotating the tires), perform the TPMS sensor ID learn procedure (refer to procedure).
-
If wheels of a different diameter are installed, use Toolbox to change the
vehicle configuration.