Speaker - Dash - LH (Premium Only) (Remove and Replace)

FRT No: 21211502

Remove

  1. Remove the mesh grille (refer to procedure).
  2. Release the screws (x2) that secure the center speaker to the IP carrier (torque 2.3 Nm), but do not fully remove the speaker at this time.

    View large image.

  3. Gently pull the speaker out of the IP carrier and disconnect the harness.
    Caution: Do not allow the harness to fall into the IP carrier.

    View large image.

  4. Remove the speaker from the vehicle.

Installation

Installation procedure is the reverse of removal.