Bracket - Headlamp Support - LH (Remove and Replace)

FRT No: 17406002

Remove

  1. Remove the headlamp (refer to procedure).

Caution: Note the routing of the harness through the headlamp bracket. Ensure that is routed correctly during reinstallation.

  1. Release the positive and negative wires from the horn.

    View large image.

  2. Release the fir tree clip that secures the harness to the headlamp bracket.

    View large image.

  3. Release the harness from the crash sensor.

    View large image.

  4. Release the clip that secures the headlamp harness to the headlamp bracket.

    View large image.

  5. Move the harness out of the way of the headlamp bracket.
  6. Release the bolts that secure the headlamp carrier to the underhood crossmember (torque 7 Nm).

    View large image.

  7. Release the bolts and washers that secure the headlamp carrier (torque 7 Nm).

    View large image.

  8. Release the push clip that secures the headlamp bracket to the windshield washer fluid reservoir.

    View large image.

Installation

Installation procedure is the reverse of removal, except for the following:

  • Replace any shims between the carrier and fender.
  • Transfer the horn to the new bracket.
  • Transfer the crash sensor to the new bracket.