Panel - Door Trim - LH - Rear (Remove and Install)

Remove the lower rear door garnish (refer to procedure).

Set the rear door to a comfortable working height.

Move the driver's seat fully forward.

Use a trim tool to release the small clips (x6) that secure the decorative trim to the door panel.

Caution: Take care not to damage component(s).

Use a trim tool to release the large metal clips (x2) that secure the decorative trim to the door panel.

Remove the bolts (x8) that secure the door trim panel to the rear door (torque 6 Nm).

Using a trim tool, release the heart flex clips (x13) that secure the rear door trim panel.

Caution: Take care not to damage component(s).

While supporting the door trim panel, disconnect the forward electrical connector from the rear door controller.

Remove the door trim panel from the vehicle and place it on a flat, clean surface.

Removal