Antenna Amplifier - AM/FM and RKE (Remove and Replace)
FRT No: 21300602
Removal
Remove the LH liftgate side trim
(refer to procedure)
.
Remove the screw that secures the antenna amplifier to the liftgate (torque 8 Nm).
View large image.
Disconnect both electrical connectors from the antenna amplifier.
View large image.
Release the clip that secures the antenna amplifier to the liftgate.
Carefully release the antenna amplifier lead from the glass connectors (x2).
View large image.
Release the adhesive strip that secures the antenna amplifier to the liftgate glazing.
Remove the antenna amplifier from the vehicle.
Installation
Installation procedure is the reverse of removal, except for the following:
Note:
Clean the affected areas before installation.
Caution:
Apply contact adhesive to the mating faces if the bond has been broken.
Replace the adhesive strip if necessary.
Ensure all contacts are clean and bond to the surface mounted antenna.
Note:
Listen for an audible click when connecting harness connectors.