Applique - Liftgate (Remove and Replace)

FRT No: 12050802

Special tool required for this procedure:

Supplier Part Number Description
Tesla 1049517-00-A Ergonomic Silicone Seam Roller

Removal

  1. Apply protective tape around the perimeter of the applique.
    Caution: Protective tape prevents the exterior paint surfaces from being damaged.
  2. Using a trim stick or other suitable tool, carefully and evenly release the clips (x6) that secure the applique to the liftgate.
    Caution: Take care not to damage component(s).

    View large image

    View large image

  3. Remove the liftgate applique from the vehicle.
  4. Remove the protective tape.

Installation

  1. If reinstalling the original applique:
    1. Remove the double-sided tape.
    2. Clean the inside of the applique with an alcohol wipe and allow it to dry completely.
    3. Apply new double-sided tape to the applique.
  2. Remove the backing from the double-sided tape.
  3. Install the 2 center clips that secure the applique to the liftgate.
    Note: Components have been removed in this graphic to aid clarity.

    View large image

    Tip: Use the locator post to correctly align the applique to the liftgate.

    View large image

  4. Working outwards from the center of the applique, install the remaining 4 clips that secure the applique to the liftgate.
  5. Working outwards from the center of the applique, press firmly on the applique using a silicone seam roller to completely seal the double-sided tape.
  6. Temporarily apply tape to both ends of the applique to apply pressure.

    View large image

  7. Wait at least 5 minutes before removing the tape.
    Caution: Failure to wait at least 5 minutes before removing the tape can result in improper adhesion of the double-sided tape.