Motor - Fan Assembly - Rear HVAC (Remove and Replace)

FRT No: 18103102

Removal

  1. Remove the rear PTC heater (refer to procedure).
  2. Remove the screw that secures the 12V harness bracket to the rear HVAC assembly (torque 1.2 Nm).

    View large image

  3. Disconnect the electrical connector from the fan motor.

    View large image

  4. Remove the screws (x3) that secure the fan motor (torque 1.2 Nm).

    View large image

  5. Remove the fan motor from the rear HVAC assembly.

Installation

Installation procedure is the reverse of removal, except for the following:

  • Clean the interior of the HVAC casing prior to assembly.