Hinge - Hood - LH (Remove and Replace)

FRT No: 11330302

Removal

  1. Remove the hood assembly (refer to procedure).
  2. Remove the push clip that secures the plastic trim piece. Pull the trim piece towards the rear of the vehicle and maneuver it around the hood hinge to remove it from the vehicle.
    Note: The following image shows the hood still installed.

    View large image.

  3. Release the clip and disconnect the strut from the ball joint on the hood hinge.
  4. Mark the installed position of the hood hinge to the body of the vehicle.
  5. Remove the bolts (x3) that secure the LH hood hinge to the body of the vehicle (torque 24 Nm).
  6. Remove the hood hinge from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:

Install the hood hinge to the previously marked position.