Pump - Windshield Washer Reservoir (Remove and Replace)

FRT No: 17501002

Removal

  1. Remove the front LH wheel arch liner (refer to procedure).
  2. Position a container to collect any spillage.
  3. Disconnect the washer pump electrical connector.

    View large image.

  4. Release the washer tube from the pump and drain any fluid from the reservoir into the container.
    Note: Place suitable absorbent material around the affected area to absorb any possible fluid spillage.
  5. Remove the pump from the washer reservoir.

Installation

Installation procedure is the reverse of removal, except for the following:

Note: Inspect the O-ring for damage and replace if necessary.