Tail Light Assembly - LH (Remove and Replace)

FRT No: 17402002

Special tool required for this procedure:

Supplier Part Number Description
Tesla 1082778-00-A CHARGE PORT DOOR ALIGNMENT TOOL, MX

Removal

  1. Remove the LH tail light assembly (refer to procedure).
  2. Remove the screws (x3) that secure the charge port door to the tail light assembly.
    Note: The charge port door and motor are removed as an assembly.

    View large image.

  3. Remove and retain the charge port door.

    View large image.

Installation

Installation procedure is the reverse of removal, except for the following:

Secure the charge port door using the charge port door alignment special tool:

  1. Make sure the screws are loose on charge port door.
  2. Align the charge port door with the top angle of the special tool, and then tighten the screws (x3) on charge port door (torque 1.25 Nm).