Door - Charge Port (Remove and Replace)

FRT No: 44011502

Note: The charge port door and motor are removed as an assembly.

Removal

  1. Remove the LH tail light assembly (refer to procedure).
  2. Remove the screws (x3) that secure the charge port door to the tail light assembly (torque 1.25 Nm).
    Note: The charge port door and motor are removed as an assembly.

    View large image.

  3. Remove the charge port door from the LH tail light assembly. Retain the tail light assembly.

    View large image.

Installation

Installation procedure is the reverse of removal, except for the following:

  1. Ensure that the studs on the tail light align with the slots on the charge port door before installing the screws.

    View large image.

  2. Perform the "Charge Port Latch Calibration":
    1. Connect a laptop with Toolbox 2.0 or later to the vehicle.
    2. Navigate to Panels > Charging > Charge Port Latch Calibration.
    3. Click Start/Play.
    4. Follow the onscreen instructions.