Removal
- Remove the bolts (x2) that secure the wiper mount bracket to the crossbeam (torque 20 Nm).
- Remove the nuts (x2) that secure the wiper mount bracket to the studs on the bulkhead (torque 20 Nm).
- Remove the nut that secures the low pressure pipe to the compressor (torque 10 Nm).
- Remove the nut that secures the charge port high pressure pipe to the condenser-to-chiller high pressure pipe (torque 10 Nm).
- Remove the nut that secures the charge port low pressure pipe to the condenser-to-chiller low pressure pipe (torque 20 Nm).
- Remove the nut that secures the charge port high pressure pipe to the charge-port-to-rocker high pressure pipe (torque 10 Nm).
- Remove the nut that secures the charge port low pressure pipe to the charge-port-to-rocker low pressure pipe (torque 10 Nm).
- Remove the bolt that secures the charge port high/low pressure pipes bracket to the RH shock tower (torque 6 Nm).
-
Air suspension vehicles: Remove the push clips (x3) that secure the cowl support
bracket to the crossbeam. Remove the cowl support bracket from the vehicle.
Note: Removing the cowl support bracket allows the air lines to be maneuvered during removal of the high/low pressure pipes.
- Remove the bolts (x2) that secure the TXV valve to the bulkhead (torque 6 Nm).
- Remove the screw that secures the charge port high/low pressure pipes to the TXV valve (torque 22 Nm).
