Lamp - Side Repeater - Front - LH (Remove and Replace)

FRT No: 17403002

Remove

  1. Remove the front LH wheel (refer to procedure).
  2. Release the rearmost push clips (x7) that secure the wheel arch liner.

    View large image.

  3. Remove the rear nut that secures the wheel arch liner to the stud on the chassis (torque 6 Nm).

    View large image.

  4. Move the rear portion of the wheel arch liner for access to the side repeater lamp.
  5. Remove the NVH pad for access to the side repeater lamp.
  6. Disconnect the electrical connector from the side repeater lamp.

    View large image.

  7. Release the locking tabs that secure the side repeater lamp to the fender.
    Tip: If the lamp is not going to be reused, break the lower locking tab to make the lamp easier to remove.
  8. Remove the side repeater lamp from the vehicle.

    View large image.

Installation

Installation procedure is the reverse of removal, except for the following:

Ensure that the side repeater lamp is flush with the fender.