Sensor - Wheel Speed - ABS - Rear - LH (Remove and Replace)

FRT No: 33100702

Warning: If the vehicle has air suspension, activate "Jack" mode on the touchscreen before raising and supporting the vehicle.

Removal

  1. Raise and support the vehicle (refer to procedure)
  2. Remove road wheel for access (refer to procedure)
  3. Remove screw securing wheel speed sensor to knuckle (torque 8 Nm).
  4. Release wheel speed sensor from knuckle.
  5. Release wheel speed sensor harness from securing clip and bracket.
  6. Remove mid aero shield (refer to procedure)
  7. Working from below, disconnect wheel speed sensor connector.
  8. Release clips (x4) securing wheel speed harness.
  9. Remove wheel speed sensor.

Installation

Installation procedure is the reverse of removal.
Note: Clean the affected areas before installation.