Pipe - High Pressure - Sub-Cool Condenser to Chiller (Remove and Replace)
FRT No: 18204002
Removal
Recover refrigerant from the vehicle
(refer to procedure)
Remove front skid plate
(refer to procedure)
Remove nut (x1) securing pipe to sub-cool condenser (torque 8 Nm).
Remove nut (x1) securing pipe retaining plate to TXV (torque 12 Nm).
Disconnect refrigerant pipes from TXV.
Caution:
Plug pipe connections to prevent ingress of moisture or dirt.
Caution:
Remove and discard O-rings.
Remove underhood storage unit for access
(refer to procedure)
Remove bolt securing sub-cool condenser / chiller high pressure pipe at union to high pressure charge port pipe (torque 8 Nm).
Caution:
Plug pipe connections to prevent ingress of moisture or dirt.
Caution:
Remove and discard O-rings.
Maneuver and remove pipe.
Installation
Installation procedure is the reverse of removal, except for the following:
Replace A/C pipe O-rings.
Caution:
Lubricate new O-rings with clean refrigerant oil.