Exterior Release Switch - Liftgate (Remove and Replace)

FRT No: 11204002

Removal

  1. Open the liftgate to a suitable working height.
  2. Remove the applique from the liftgate (refer to procedure).
    Caution: Take care not to damage component(s).
    Caution: Protect paintwork from possible damage during this procedure.
  3. Remove the bolts (x2) that secure the switch housing to the liftgate (torque 3 Nm).
  4. Release the switch and housing from the liftgate, then rotate and disconnect the harness connector.
  5. Remove the screws (x2) that secure the liftgate switch to the housing and remove the switch.

Installation

Installation procedure is the reverse of removal.