Latch - Liftgate (Remove and Replace)
Removal
-
Open liftgate and secure at working height.
-
Remove liftgate trim
(refer to procedure)
-
Disconnect wiring harness connector.
-
Remove screws (x2) securing liftgate latch assembly (torque 10 Nm).
-
Release outer cable from abutment and disconnect inner cable from latch assembly.
-
Remove latch assembly.
Installation
-
Installation procedure is the reverse of removal, except for the following.
-
Power the cinch motor until the correct alignment is reached. Open liftgate and torque tighten bolts.