Subframe Assembly - Front (Remove and Replace)

FRT No: 30010302

Removal

  1. Remove front subframe assembly for access (refer to procedure)
  2. Remove and discard the bolts (x2) securing steering rack assembly to subframe (torque 175 Nm).
    Caution: Replace all Patchbolt(s).
    Caution: Ensure that the bolts are torqued in the correct sequence during reinstallation.
  3. Remove steering rack assembly from front subframe.

Installation

Installation procedure is the reverse of removal, except for the following:
When reinstalling the bolts that secure the subframe to the steering rack, follow this sequence:
  1. Tighten the LH bolt to 30 Nm.
  2. Tighten the RH bolt to 30 Nm.
  3. Fully torque the LH bolt to 175 Nm.
  4. Fully torque the RH bolt to 175 Nm.