LF Antenna - Center - Rear (Remove and Replace)

FRT No: 17252502

Warning: If the vehicle has air suspension, activate "Jack" mode on the touchscreen before raising and supporting the vehicle.

Removal

  1. Raise and support the vehicle (refer to procedure)
    Warning: Do not work on an incorrectly supported vehicle.
    Warning: To avoid personal injury, use appropriate equipment when performing this operation.
  2. Remove the rear diffuser (refer to procedure)

Note: These graphics show the 1st generation antenna. This procedure is valid for the 1st and 2nd generation antennas.

  1. Remove the screws (x2) that secure the LF antenna to the body (torque 2 Nm).
  2. Disconnect the harness connector and remove the LF antenna.

Installation

Installation procedure is the reverse of removal.
Note: Clean the affected areas before installation.