Module - Sunroof Controller (Remove and Replace)
FRT No: 17152002
Removal
Remove the body control module (BCM)
(refer to procedure)
Remove the 4 bolts and 1 nut that secure the sunroof controller mounting bracket to the body (torque 8 Nm).
Carefully turn the mounting bracket over.
Remove the 3 nuts that secure the controller to the bracket (torque 5 Nm).
Disconnect the 2 controller harness connectors.
Remove the controller from the mounting bracket.
Installation
Installation procedure is the reverse of removal, except for the following:
Use Toolbox to update or redeploy the firmware:
If the vehicle is not running the latest firmware, run the "Vehicle Firmware Update" procedure.
If the vehicle is running the latest firmware, run the "Firmware Redeploy" procedure.