Sensor - Impact - C Pillar (Remove and Replace)

FRT No: 20200702

Removal

  1. Remove sill panel trim (refer to procedure)
  2. Pull up lower portion of the 'C' post lower trim panel by releasing the trim clips.
    Caution: Take care not to damage component(s).
    Caution: Replace any broken clips.
  3. Remove 'B' pillar lower trim (refer to procedure)
  4. Disconnect impact sensor harness connector.
  5. Remove screw (x1) securing impact sensor to body (torque 8 Nm).
  6. Remove impact sensor.

Installation

Installation procedure is the reverse of removal.