Pressure Transducer - Low Pressure (Remove and Replace)

FRT No: 18205602

Removal

  1. Recover refrigerant from the vehicle (refer to procedure).
  2. Remove the underhood storage unit (refer to procedure).
  3. Disconnect the electrical connector from the pressure transducer.
  4. Use a wrench to remove the pressure transducer from the A/C pipe (torque 8 Nm).
    Caution: To prevent damage always use a suitable wrench to hold the backing nut when loosening pipes and unions.
    Caution: Plug pipe connections to prevent ingress of moisture or dirt.
  5. Remove the pressure transducer from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:

Recharge the refrigerant.