Cup Holder (Remove and Replace)

FRT No: 15191802

Removal

  1. Remove center console assembly (refer to procedure)
  2. Position center console on suitable clean bench to prevent damage.
    Caution: Take care not to damage component(s).
  3. Remove LH rear vent (refer to procedure)
  4. Remove screws (x2) securing cup holder front trim to chassis (torque 2 Nm).
  5. Release clips (x2) and remove cup holder front trim.
  6. Remove cup holder mat to access screws.
  7. Carefully lift vertically to release clips (x7) securing arm rest and cup holder trim.
    Caution: Take care not to damage component(s).
    Caution: Replace any broken clips.
  8. Remove screws (x10) securing cup holder assembly to chassis from the top (torque 2 Nm).
  9. Remove clips for air ducting to allow more movement for access.
  10. Remove screws (x4) securing air ducting framework to center console chassis (torque 2 Nm).
  11. Remove screws (x2) securing cup holder to framework (torque 2 Nm).
  12. Remove cup holder assembly.

Installation

Installation procedure is the reverse of removal.