Sway Bar - Rear (Remove and Replace)

FRT No: 31033102

Remove

  1. Remove the rear subframe (refer to procedure).
  2. On each side of the vehicle, remove the nut that secures the sway bar to the drop link (torque 70 Nm).
    Caution: To prevent ball joint damage, always hold the ball joint pin with a wrench while loosening or tightening the lock nut.
  3. On each side of the vehicle, release the bolt that secures the sway bar brackets to the subframe (torque 70 Nm).
  4. Remove the rear sway bar.

Install

Installation procedure is the reverse of removal.