Drive Cycle Calibration - Forward Facing Camera

FRT No: 17230500

Note: If available, calibrate the forward facing camera using the Camera Calibration Target (refer to procedure).
Note: This procedure describes how to perform a drive cycle calibration on the forward facing camera. It does not apply to the rear facing camera.
  1. Connect a laptop with Toolbox 2.0 or later to the vehicle.
  2. In Toolbox, select Panels > Driver Assist > Camera Calibration.
  3. Click the Start/Play button.
  4. Follow the onscreen instructions to calibrate the forward facing camera.
    Warning: Perform the calibration procedure in a suitable location and comply with all local traffic safety laws.
    Note: Have an assistant monitor Toolbox during the drive cycle.