Sensor - Wheel Speed - ABS - Rear - LH (Remove and Replace)

FRT No: 33100702

Removal

  1. Remove the rear wheel (refer to procedure).
  2. Remove the bolt that secures the wheel speed sensor to the knuckle (torque 8 Nm).
    Note: Components have been removed in this graphic to aid clarity.
  3. Remove the mid aero shield (refer to procedure).
  4. Disconnect the wheel speed sensor electrical connector.
    Note: Components have been removed in this graphic to aid clarity.
  5. Release the fir tree clip that secures the wheel speed sensor to the rear subframe.
    Note: Components have been removed in this graphic to aid clarity.
  6. Release the wheel speed sensor from the bracket on the knuckle.
    Note: Components have been removed in this graphic to aid clarity.
  7. Remove the wheel speed sensor from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:

Note: Clean the affected areas before installation.